Please Note: You are viewing the unstyled version of Wessels. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.

Skip to Primary Site Navigation, Secondary Site Navigation, Content, Company Address

Home > Specialty Tanks > Filtration Tanks

Filtration Tanks

Filtration style tanks specialize in the removal of dirt and other solids from liquid systems.

Centrifugal Solids Separator

CFS Centrifugal Solids Seperator Tank

Wessels CFS-Series Centrifugal Solids Separators are designed for in-line or slip-stream low flow filtration of entrained solids from a liquid system. This filterless separator achieves the removal of 50 micron and larger solids through centrifugal force and friction. Fluid enters the separator at a tangent and creates a vortex within the unit. The increase in the fluid's centfifugal velocity as the fluid enters the body of the unit separates the more dense solids from the liquid. Separated solids fall to the lower collection chamber while exiting fluid is drawn from the center of the vortex back into the system or fluid stream. Removal of debris in your system can increase system efficiencies, extend the life of system components, and lower operational costs.

CFS Sizes and Specifications


Typhoon Filtration System

TFS/TFA Typhoon Solid from Liquid Cartridge Filter System

The Typhoon Filtration System is engineered to remove solids from liquids. It offers revolutionary filter performance due to an innovative design that utilizes flow-diverging technology to separate dense solids defore filter contact. These solids accumulate where they can be easily blown down and removed. System water then passes through the patented, multi-path Typhoon filter where specially designed, ultra-effecient pleat cartridges filter the water even further. These two technologies combine to create a system that provides increased dirt holding capacity, longer filter life, and decreased maintenance expenses.

TFS Sizes and Specifications (Non-ASME)

TFA Sizes and Specifications (ASME)


Skip to Primary Site Navigation, Secondary Site Navigation, Company Address, Top of Page