Please Note: You are viewing the unstyled version of Wessels. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.

Skip to Primary Site Navigation, Secondary Site Navigation, Content, Company Address

Home > Air Separators > Air & Dirt Separators

Air & Dirt Separators

Air / Dirt Separator

Air & dirt separators are designed to eliminate entrained air and separate debris associated with start-up and maintenance of any hydronic system. The design incorporates a skim valve, used to eliminate floating debris, a removable end cover for coalescing medium access, and an air vent to automatically release air from the separator.

Air / Dirt Separator Models

WVA Air & Dirt Separator

The WVA Series air & dirt separators with removable cartridge are manufactured to ASME specifications. The WVA Series is rated to 250°F and 125 PSI.

WVA Sizes and Specifications


High Velocity WVA Air & Dirt Separator

The WVA-HV Series air & dirt separators with removeable cartridge. are manufactured to ASME specifications. The WVA High Velocity series is rated to 250°F and 125 PSI. A WVA-HV Series is available in non-ASME with an ASME non-removeable cartridge.

WVA Sizes and Specifications


Air & Dirt Separator Performance Charts

Wess-Vent Air / Dirt Separator Flow / Pressure Performance Data



Skip to Primary Site Navigation, Secondary Site Navigation, Company Address, Top of Page