WesPlate® Heat Exchanger

The WesPlate® Heat Exchanger consists of a frame built in accordance with ASME boiler and pressure code and following the general design parameters of AHRI construction. A series of corrugated stainless steel plates are designed to maximize turbulence and heat transfer. Gaskets are fixed between the plates to contain two separate fluids that flow alternatively to produce the highest rate of heat transfer.

Wesplate® Heat Exchangers transfer heat from a building’s primary heating or cooling loop to a secondary loop. The heat exchanger can separate two systems that have very different operating pressures, operating fluids, (i.e. glycols, potable water, etc.) operating temperatures and cleanliness issues.

WP Series (ASME):

• Built in accordance with the ASME boiler and pressure vessel code
• 304SS, 316SS & Titanium plates with Nitrile & EPDM gaskets
• Capacities to 10,500 GPM and 50,000,000 BTU/hr
• 150 PSI (standard), 300 PSI & 400 PSI pressure ratings

WPDW Series (ASME):

• CRN certified
• Built in accordance with the ASME boiler and pressure vessel code (Non-ASME available)
• Double wall for potable applications
• 304SS, 316SS & Titanium plates with Nitrile & EPDM gaskets
• Capacities to 2,200 GPM and 50,000,000 Btu/hr
• 150 psi (standard) & 300 psi pressure ratings