Shell and Tube Heat Exchangers
WesTube® Heat Exchanger
The WesTube® Heat Exchanger consists of two sides for two different media. The Tube Side media flows inside the tubes and is diverted by the heat exchanger head located on the end into two or four passes or circuits. The Shell Side fluid flows on the outside of the tubes and is contained by the shell where it is diverted by baffles or tube supports that also carry the weight of the tubes.
WesTube® Heat Exchangers transfer heat from a building’s primary heating or cooling loop to a secondary loop. The heat exchanger can separate two systems that have very different operating pressures, operating fluids (i.e. glycols, potable water, etc.), operating temperatures and cleanliness issues.
WST Series (ASME):
- Steam in Shell
- CRN certified
- Built in accordance with the ASME boiler and pressure vessel code
- Tube side: 125 PSI (standard), 150, 300 PSI & 400 PSI
- Shell side: 150 PSI, 300 PSI pressure ratings
(coming soon)
WWT Series (ASME):
- Boiler Water in Shell
- CRN certified
- Built in accordance with the ASME boiler and pressure vessel code
- Tube side: 125 PSI (standard), 150, 300 PSI & 400 PSI
- Shell side: 150 PSI, 300 PSI pressure ratings
(coming soon)
WSD/WDD Series (ASME):
- Double Wall
- CRN certified
- Built in accordance with the ASME boiler and pressure vessel code
- Tube side: 125 PSI (standard), 150, 300 PSI & 400 PSI
- Shell side: 150 PSI, 300 PSI pressure ratings
(coming soon)